Advantek Networks (USB 2.0) User Manual download pdf (Page 46)

PCM-9584 User Manual 36

To Establish Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password,” enter the desired password and

press <Enter>.

3. At the “Confirm Password” prompt, retype the desired password,

then press <Enter>.

4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password,” enter the existing password and

press <Enter>.

3. You will see “Confirm Password.” Type it again, and press

<Enter>.

4. Select Set Password again, and at the “Enter Password” prompt,

enter the new password and press <Enter>.

5. At the “Confirm Password” prompt, retype the new password, and

press <Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Disable Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password,” enter the existing password and

press <Enter>.

3. You will see “Confirm Password.” Type it again, and press

<Enter>.

4. Select Set Password again, and at the “Enter Password” prompt,

don’t enter anything; just press <Enter>.

5. At the “Confirm Password” prompt, again don’t type in anything;

just press <Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 117 118

No comments

Advantek Networks (USB 2.0) User Manual Page 46